| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
1 ) Apply safety rules, regulations, and procedures for operating milling machines.
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
2 ) Demonstrate care and safety for milling machines.
Examples: maintenance—operating, cleaning, lubricating, setting up
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
3 ) Demonstrate milling machine operations, including setting up and using a rotary table, machining a woodruff keyway, cutting T-slots, centering a rotary table, boring and counterboring a hole, machining slots in a work piece, power tapping a hole, machining a close tolerance square block, calculating speed and feed per material and tooling, milling multiple steps in a work piece, and milling pockets on a work piece.
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
4 ) Demonstrate operations for milling steps, slots, angles, and pockets in a work piece.
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
5 ) Demonstrate advanced milling operations, including calculating speed and feed for specified materials and tooling; power tapping a hole; indicating a round hole; milling a block square to close tolerance; milling precise angles on a work piece; milling steps, slots, and pockets on a work piece, and drilling a precise circular hole pattern.
Example: sine calculations
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
6 ) Demonstrate procedures for milling advanced steps, slots, angles, and pockets in a work piece according to NIMS Level I standards.
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
7 ) Use grinding techniques, including grinding a grooving tool, grinding an angle using a sine bar, and grinding a block square and parallel according to NIMS Level I standards.
|
| Manufacturing (2009) |
| Grade(s): 9 - 12 |
| Intermediate Mill and Surface Grinder |
| All Resources: |
0 |
|
8 ) Demonstrate care and safety for a surface grinder.
Examples: maintenance—operating, cleaning, lubricating, setting up
|
