| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
1 ) Calculate 11 1/4, 22 1/2, 45, 60, and 72 degree offsets, parallel offsets, and rolling piping offsets, including using a framing square to find the travel in a piping offset and using a folding rule to find given angles.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
2 ) Interpret information from a site plan to locate plumbing entry points, wall chases, material takeoff, and drain water, vent pipe, and water supply systems.
• Developing estimates for installation of piping systems
• Establishing piping fixture locations
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
3 ) Explain the use of shoring materials and premanufactured support systems used in pipeline installation.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
4 ) Determine the grade and elevation of a trench for a sewer line.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
5 ) Identify types of underground piping materials and fittings by size and classification.
Examples: Chlorinated Polyvinyl Chloride (CPVC), Polyvinyl Chloride (PVC), ductile iron, carbon steel
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
6 ) Demonstrate the installation of various drain systems.
Examples: floor, roof, other specified areas
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
7 ) Demonstrate how to service various types of valves used in plumbing and pipefitting applications.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
8 ) Install a water distribution system using various hangers and fittings.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
9 ) Install a properly-sized water service line, including backflow prevention.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
10 ) Demonstrate the installation of bathtubs, shower stalls, valves, faucets, water closets, urinals, lavatories, sinks, and pop-up drains.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
11 ) Demonstrate safety precautions that must be followed when working on or near electrical equipment.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
12 ) Calculate wattage consumed by an energized circuit.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
13 ) Determine voltage, current, and resistance measurements using electrical test equipment.
• Determining the position of leads for reading voltage, current, and resistance
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
14 ) Identify hangers and supports used to install drainage, waste, and vent (DWV) and water supply systems.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
15 ) Install pipe hangers and supports according to local codes and manufacturer's specifications.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
16 ) Demonstrate the installation of common types of fire-stopping materials used in penetrations through fire-rated structural members.
Examples: walls, floors, ceilings
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
17 ) Develop a material takeoff from a given set of piping plans.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
18 ) Determine the location of fixtures and field routing of plumbing from plans and fixture
rough-in sheets.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
19 ) Describe a building sewer system, a building drain, and a DWV system using appropriate
hangers on correct grade.
|
| Architecture and Construction (2009) |
| Grade(s): 9 - 12 |
| Plumbing and Pipefitting II |
| All Resources: |
0 |
|
20 ) Determine correct function by testing a DWV system.
|
