Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
1 ) Demonstrate safe welding procedures related to SMAW and carbon arc cutting (CAC) process.
|
Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
2 ) Demonstrate correct T-joint techniques for single and multiple passes with an E7018 and E6010 electrode in vertical fillet welds in the 3-F position and overhead fillet welds in the 4-F position.
|
Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
3 ) Demonstrate correct lap-joint techniques with an E7018 and E6010 electrode in vertical fillet welds in the 3-F position and overhead fillet welds in the 4-F position.
|
Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
4 ) Demonstrate correct corner-joint techniques with an E7018 and an E6010 electrode in vertical fillet welds in the 3-F and overhead fillet welds in the 4-F position.
|
Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
5 ) Demonstrate the setup for manual air carbon arc cutting equipment for carbon steel gouging and cutting.
|
Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
6 ) Perform CAC cutting operations according to specifications.
|
Architecture and Construction (2009) |
Grade(s): 9 - 12 |
Applied Welding II with Carbon Arc Cutting |
All Resources: |
0 |
|
7 ) Perform CAC gouging according to specifications.
|