|
1 ) Identify types of commercial construction drawings included in a set of plans and a materials takeoff. |
||||||||
|
2 ) Interpret elevation, schedules, sections, details, symbols, and specifications contained in commercial construction drawings. |
||||||||
|
3 ) Convert measurements used in commercial carpentry applications. Examples: engineering scale, architectural scale Using a transit to determine site and building layout according to specifications
|
||||||||
|
4 ) Describe aerial lifts, skid steer loaders, trenchers, generators, compressors, compactors, forklifts, and backhoes. |
||||||||
|
5 ) Demonstrate the set-up of equipment for oxyfuel cutting. |
||||||||
|
6 ) Identify types of arc welding electrodes. |
||||||||
|
7 ) Demonstrate procedures to start, stop, and restart a welding bead. Constructing a lap-joint fillet weld in overhead position
Constructing a T-joint fillet weld in the vertical up position
|
||||||||
|
8 ) Demonstrate installation procedures for interior and end bays of metal buildings. |
||||||||
|
9 ) Describe procedures used in leveling, squaring, and determining plumb lines for a metal building. |
||||||||
|
10 ) Describe types of walls and wall finishes used on metal buildings. |
||||||||
|
11 ) Demonstrate installation procedures for windows and doors in metal buildings. |
||||||||
|
12 ) Interpret metal building drawings and schematics. |
||||||||
|
13 ) Identify types of trusses and joists used in commercial roofing. |
||||||||
|
14 ) Demonstrate the installation of panels for a lap seam metal roof, including the preparation of eaves. |
||||||||
|
15 ) Demonstrate installation procedures for a built-up roof. |
||||||||
|
16 ) Demonstrate installation procedures for various metal roof systems. |
||||||||
|
17 ) Demonstrate the sealing of a side-lap and standing-seam metal roof. |
||||||||
|
18 ) Interpret plans and shop drawings related to ceiling layout. |
||||||||
|
19 ) Install selected suspended ceilings according to specifications. |