ALEX Resources

   View Standards     Standard(s): [SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

[SC2015] (4) 15 :

15 ) Analyze and interpret data (e.g., angle of slope in downhill movement of water, volume of water flow, cycles of freezing and thawing of water, cycles of heating and cooling of water, speed of wind, relative rate of soil deposition, amount of vegetation) to determine effects of weathering and rate of erosion by water, ice, wind, and vegetation using one single form of weathering or erosion at a time.

This module includes seven hands-on, inquiry-based activities that will model the effects of weathering and erosion on Earth’s surface. Students will investigate the effects of weathering, erosion, and deposition using various materials such as aquarium gravel, square pretzels, chalk, vinegar, modeling clay, sand, and a hairdryer. This module will provide instruction on the effects of water on land; the effects slope has on flooding; the effects of the wind on land; the effects of different wave actions on land; the effects of glaciers on land; and the effects of mechanical and chemical weathering. In addition, the students will create a model that will demonstrate how groundwater can cause a sinkhole.

   View Standards     Standard(s): [SC2015] (0) 1 :

1 ) Investigate the resulting motion of objects when forces of different strengths and directions act upon them (e.g., object being pushed, object being pulled, two objects colliding).

[SC2015] (1) 3 :

3 ) Investigate materials to determine which types allow light to pass through (e.g., transparent materials such as clear plastic wrap), allow only partial light to pass through (e.g., translucent materials such as wax paper), block light (e.g., opaque materials such as construction paper), or reflect light (e.g., shiny materials such as aluminum foil).

[SC2015] (2) 5 :

5 ) Plan and carry out an investigation, using one variable at a time (e.g., water, light, soil, air), to determine the growth needs of plants.

[SC2015] (3) 2 :

2 ) Investigate, measure, and communicate in a graphical format how an observed pattern of motion (e.g., a child swinging in a swing, a ball rolling back and forth in a bowl, two children teetering on a see-saw, a model vehicle rolling down a ramp of varying heights, a pendulum swinging) can be used to predict the future motion of an object.

[SC2015] (4) 2 :

2 ) Plan and carry out investigations that explain transference of energy from place to place by sound, light, heat, and electric currents.

a. Provide evidence that heat can be produced in many ways (e.g., rubbing hands together, burning leaves) and can move from one object to another by conduction.

b. Demonstrate that different objects can absorb, reflect, and/or conduct energy.

c. Demonstrate that electric circuits require a complete loop through which an electric current can pass.

[SC2015] (5) 2 :

2 ) Investigate matter to provide mathematical evidence, including graphs, to show that regardless of the type of reaction (e.g., new substance forming due to dissolving or mixing) or change (e.g., phase change) that occurs when heating, cooling, or mixing substances, the total weight of the matter is conserved.

[SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

A scientific theory is a proposed description, explanation, or model of something occurring in nature. These theories have to be testable so that scientists can use the scientific method to see if they work.

The classroom resource provides a video that will introduce students to the scientific method, developing hypotheses, and collecting evidence. There is a karaoke song that students can learn to help them remember the steps in the scientific method. Students can use the information presented in this video to follow the scientific method as they plan their own investigations. There is also a short test that can be used to assess students' understanding. 

   View Standards     Standard(s): [SC2015] (0) 1 :

1 ) Investigate the resulting motion of objects when forces of different strengths and directions act upon them (e.g., object being pushed, object being pulled, two objects colliding).

[SC2015] (1) 3 :

3 ) Investigate materials to determine which types allow light to pass through (e.g., transparent materials such as clear plastic wrap), allow only partial light to pass through (e.g., translucent materials such as wax paper), block light (e.g., opaque materials such as construction paper), or reflect light (e.g., shiny materials such as aluminum foil).

[SC2015] (3) 2 :

2 ) Investigate, measure, and communicate in a graphical format how an observed pattern of motion (e.g., a child swinging in a swing, a ball rolling back and forth in a bowl, two children teetering on a see-saw, a model vehicle rolling down a ramp of varying heights, a pendulum swinging) can be used to predict the future motion of an object.

[SC2015] (4) 2 :

2 ) Plan and carry out investigations that explain transference of energy from place to place by sound, light, heat, and electric currents.

a. Provide evidence that heat can be produced in many ways (e.g., rubbing hands together, burning leaves) and can move from one object to another by conduction.

b. Demonstrate that different objects can absorb, reflect, and/or conduct energy.

c. Demonstrate that electric circuits require a complete loop through which an electric current can pass.

[SC2015] (5) 2 :

2 ) Investigate matter to provide mathematical evidence, including graphs, to show that regardless of the type of reaction (e.g., new substance forming due to dissolving or mixing) or change (e.g., phase change) that occurs when heating, cooling, or mixing substances, the total weight of the matter is conserved.

[SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

Scientists are always working to better understand the world. They use the scientific method to help them. The scientific method includes making observations, developing hypotheses, designing experiments, collecting data, and then drawing conclusions.

The classroom resource provides a video that will introduce students to the scientific method and experimentation. There is a karaoke song that students can learn to help them remember the steps in the scientific method. Students can use the information presented in this video to follow the scientific method as they plan their own investigations. There is also a short test that can be used to assess students' understanding.

   View Standards     Standard(s): [SC2015] (0) 1 :

1 ) Investigate the resulting motion of objects when forces of different strengths and directions act upon them (e.g., object being pushed, object being pulled, two objects colliding).

[SC2015] (1) 3 :

3 ) Investigate materials to determine which types allow light to pass through (e.g., transparent materials such as clear plastic wrap), allow only partial light to pass through (e.g., translucent materials such as wax paper), block light (e.g., opaque materials such as construction paper), or reflect light (e.g., shiny materials such as aluminum foil).

[SC2015] (2) 5 :

5 ) Plan and carry out an investigation, using one variable at a time (e.g., water, light, soil, air), to determine the growth needs of plants.

[SC2015] (3) 2 :

2 ) Investigate, measure, and communicate in a graphical format how an observed pattern of motion (e.g., a child swinging in a swing, a ball rolling back and forth in a bowl, two children teetering on a see-saw, a model vehicle rolling down a ramp of varying heights, a pendulum swinging) can be used to predict the future motion of an object.

[SC2015] (4) 2 :

2 ) Plan and carry out investigations that explain transference of energy from place to place by sound, light, heat, and electric currents.

a. Provide evidence that heat can be produced in many ways (e.g., rubbing hands together, burning leaves) and can move from one object to another by conduction.

b. Demonstrate that different objects can absorb, reflect, and/or conduct energy.

c. Demonstrate that electric circuits require a complete loop through which an electric current can pass.

[SC2015] (5) 2 :

2 ) Investigate matter to provide mathematical evidence, including graphs, to show that regardless of the type of reaction (e.g., new substance forming due to dissolving or mixing) or change (e.g., phase change) that occurs when heating, cooling, or mixing substances, the total weight of the matter is conserved.

[SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

When scientists conduct experiments, they collect data through observation and measurement. There are many different ways to measure data, but they all help ensure that scientists can collect accurate information.

The classroom resource provides a karaoke song that will describe how scientists collect data as they experiment. Students can use the information presented in this audio resource as they plan their own investigations. There is also a short test that can be used to assess students' understanding. 

   View Standards     Standard(s): [SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

Igneous rock forms from melted rock (magma). Magma exists inside the earth’s surface, and it becomes lava when it is released through a volcanic eruption. When it cools, that is when it becomes igneous rock.

The classroom resource provides a slide show that will describe how igneous rocks are formed during the rock cycle. There is a karaoke song that students can learn to help them remember the steps in the rock cycle process. There is also a short test that can be used to assess students' understanding. Students can use the information presented in this slide show to plan their own investigations.

   View Standards     Standard(s): [SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

Metamorphic rocks can be formed from igneous, sedimentary, and even other metamorphic rocks.

The classroom resource provides a slide show that will describe how metamorphic rocks are formed during the rock cycle. There is a karaoke song that students can learn to help them remember the steps in the rock cycle process. There is also a short test that can be used to assess students' understanding. Students can use the information presented in this slide show to plan their own investigations.

   View Standards     Standard(s): [SC2015] (2) 8 :

8 ) Make observations from media to obtain information about Earth's events that happen over a short period of time (e.g., tornados, volcanic explosions, earthquakes) or over a time period longer than one can observe (e.g., erosion of rocks, melting of glaciers).

[SC2015] (4) 12 :

12 ) Construct explanations by citing evidence found in patterns of rock formations and fossils in rock layers that Earth changes over time through both slow and rapid processes (e.g., rock layers containing shell fossils appearing above rock layers containing plant fossils and no shells indicating a change from land to water over time, a canyon with different rock layers in the walls and a river in the bottom indicating that over time a river cut through the rock).

[SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

Sedimentary rock is naturally formed in the Earth’s crust. It is formed when sediment deposits form layers, compact, and then cement together, creating a new rock. Sedimentary rocks are used for building materials, and sometimes they even contain fossils.

The classroom resource provides a slide show that will describe how sedimentary rocks are formed during the rock cycle. There is a karaoke song that students can learn to help them remember the steps in the rock cycle process. There is also a short test that can be used to assess students' understanding. Students can use the information presented in this slide show to plan their own investigations.

   View Standards     Standard(s): [SC2015] ES6 (6) 8 :

8 ) Plan and carry out investigations that demonstrate the chemical and physical processes that form rocks and cycle Earth's materials (e.g., processes of crystallization, heating and cooling, weathering, deformation, and sedimentation).

Rock is the hard, solid material, consisting of one or more minerals, that make up the Earth. Rocks continuously change from one type to another through the rock cycle process. There are three types of rocks: igneous, metamorphic, and sedimentary.

The classroom resource provides a video that will describe how rocks are formed through physical and chemical processes in the rock cycle. There is a karaoke song that students can learn to help them remember the steps in the rock cycle process. There is also a short test that can be used to assess students' understanding. Students can use the information presented in this video to plan their own investigations.